Digital Rangefinder

Specifications:

• Objective lens: 28mm 
• Eyepiece: 16mm 
• Resolution: 13 inch 
• Magnification: 7X 
• The farthest test distance is 930 yards (1 yards = 0.914 meters) 
• Visual angle: 7.8 degrees 
• Power supply: 2 X CR2032 button batteries 
• Size: approx. 90x50x38mm/3.54x1.96x1.49'' 

Descriptions: 

• This is a golf observation instrument that uses precision optics and digital technology to measure distance. 
• This is a very safe distance test device, without any form of energy radiation, without any damage and damage to the human body during the measurement of the distance. 

Functions: 

• GREEN MODE. (Specially designed for golfers, you can easily get the distance between your holes) 
• GENERAL MODE. (Suitable for the general situation, first you put the target height into, you can measure the distance between the target and the object) 

Operation Manual: 

• Press the switch / adjust button to start the instrument will directly enter the lawn function. 
• When playing golf: 
• The height (2.6 yards) of the scale in which the code is in is entered. 
• Align the bottom line of the screen with the horizontal line of the lawn. 
• The position of the scan line is raised to the top of the golf flagpole press the switch/adjustment key. 
• The number will be at the top of the screen, indicating the distance between the ball and the hole. 
• The distance used for measuring special targets: 
• When the function key is used, the instrument enters the general functional state, and the screen displays three digits and one decimal point. 
• Press the function key to move to the ten digits, and then press the switch / adjust key to enter the number, the range is 0 to 9. 
• Repeat the above steps, set the number of bits and below the decimal point. 
• Press the function key to finish the above input process. 
• Depending on the height you enter, the screen will show the minimum distance you can measure. 
• Align the bottom line of the screen with the lowest line of the object. 
• Switch the position of the scan line up to the top of the target by pressing the switch/adjustment key. 
• The number will appear at the top of the screen, indicating the distance between you and the target. Please input its height.